Patchwork Halloween Project Bag

This slideshow requires JavaScript.

Here is a project bag I made for my friend Lora for a Halloween swap we’re doing.   It can be used to keep a crochet or knitting project intact while in progress, or for a million other things. I took some in-process photos and decided to write a tutorial for it.

If you hover your pointer over the photo slideshow, you can pause it to review the photos. 

The first thing I did was cut out forty eight 2.5 by 2.5 inch squares, then laid them out how I thought they looked best. 

I started sewing the squares together in rows of four with a 1/4 inch seam allowance.

Once one row was completed, I ironed the seams, set it aside, and went on to the next row.

When I had all the rows completed, I stared sewing them together with the same 1/4 inch seam allowance.  It came together pretty fast!

I chose linen for my accent fabric at the bottom of the bag, but you could use most anything.  I cut a piece of linen 3 1/2 by 14 1/2 inches and pinned it to the bottom of my patchwork piece.  Another 1/4 inch seam and it’s attached.

I gave it a hand embroidered detail by doing a running stitch with six strands of orange embroidery floss right along the seam I just completed.

Next it’s time to turn your large rectangular piece into a tube which will form the sides of the bag.  Just fold it in half with right sides together and sew a 1/4 inch seam up the edges.  Press the seam open when you’re done.

Using a compass, draw a 7 3/4 inch diameter circle on a piece of paper then cut it out. This  will be your template for the bottom of your bag.  Pin the paper circle to the linen fabric and cut out the circle.  Pin the linen circle to the bottom of the tube.

Sew the round bottom to the sides of the bag with a 1/4 inch seam.  Clip the curve every half inch.

The lining is really similar to the process you just followed to make the exterior of your bag.  Cut a piece of lining fabric 11 by 24 1/2 inches and sew up the short side into a tube.  Cut another 7 3/4 inch circle, pin it right side together to the bottom of your tube and sew it on with a 1/4 inch seam  Clip the curve.

For the drawstring case, cut a piece of fabric 2.5 by 25.5 inches and iron a 1/4 inch seam along one of the long edges.  Turn both of the short ends over 1/4 inch, then another 1/4 inch run a seam down the middle to give the drawstring opening a finished edge. NOTE: the drawstring used in this project was actually 1.5 by 24.5 inches and I decided for future projects, I would increase the width in order to make it easier to sew.

Place the lining inside the exterior bag.  The wrong side of your lining should be touching the wrong side of your patchwork piece.  Now it’s time to attach the drawstring case along the top of the patchwork piece.  With right sides together, pin the un-ironed edge of your drawstring case to the outside of your bag.

Sew the drawstring case on using a 1/4 inch seam.

The final thing you need to do is to fold the drawstring case over and hand stitch the ironed edge to the lining.

Thread a drawstring and you’re done!  This project won a second place ribbon at our county fair!



4 Comments (+add yours?)

  1. Megan
    Oct 03, 2012 @ 07:36:48

    Awesome bag!! Thanks for the tutorial, I’m going to have to make one! 🙂


  2. Susan ~ Killam Creative
    Oct 03, 2012 @ 07:47:54

    Now that’s a fun bag and a great tutorial! Congrats on your ribbon, too. 🙂


  3. Lorraine
    Oct 03, 2012 @ 13:14:06

    Are you sure you aren’t related to Mother other than by marriage? How clever!


  4. Sandy
    Oct 05, 2012 @ 10:22:23

    That is really adorable. Very creative. Sorry I missed you for lunch. I will try again next time I am in Raleigh.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: